Tag Archives: featured

How to Maintain and clean your solid wooden furniture

Live with wooden furniture and handle it properly! Living with wooden furniture means bringing a piece of nature into your home. And precisely because wood is a natural material, it works and darkens somewhat. This is completely natural and also shows that this is a piece of furniture made of wood and not of MDF boards. It is therefore more a quality feature than a defect.

Living with wood is quite uncomplicated. Especially solid wood furniture is very robust and also easy to maintain if a few points are observed. For example, you should take up spilled liquids with a soft cloth as soon as possible and wipe it dry so that they do not penetrate the wood and cause it to swell or leave unsightly edges. Please also do not place hot pots or coffee pots directly on the table top. That is actually all you need to consider in your everyday life with wooden furniture.

You will see that in everyday life a duster and a moistened rag are sufficient to clean your wooden furniture. You can and should avoid using chemicals, even universal cleaners or washing-up liquid. If the wood is a little more dirty, use some neutral or curd soap instead.

Cleaning wooden furniture – cleaning the wooden table

However, you should handle wooden furniture with care, especially solid wood furniture, after all, these are high-quality natural products that you can enjoy for a lifetime. Prevention is the best care, so please remember:

  • Do not place anything sharp-edged on wooden furniture, even objects where a lot of load presses on a small surface can cause scratches or dents.
  • Hot and wet objects can damage the wood surface. Please remove spilled liquids quickly and do not place anything hot on the wooden table without a coaster.
  • Please only dust with a soft cloth without polish or similar agents, which usually contain abrasive particles. A microfibre cloth is also suitable, preferably one for spectacle lenses, which cleans particularly gently.
  • Do not use commercially available chemical cleaners. If it is absolutely necessary, just use a little neutral or curd soap and a damp cloth and then wipe it dry quickly.
  • Wood reacts sensitively to disturbances in the room climate, so please ventilate regularly and make sure that the room climate is neither too dry nor too humid.
  • Expect the wood to darken, especially in very bright rooms. But this is a completely natural process and not a defect. If you want to keep the light colour tone as long as possible, do not expose your wooden furniture to direct sunlight.

The care of wooden furniture – care of the wooden table

It’s like with humans – to maintain beauty into old age, some care is needed. So even wooden furniture needs a little surface care from time to time. It serves not only to maintain beauty but also to protect the surface. But different surfaces also require different care.

The right care will preserve the beauty and usability of your wooden furniture, but please proceed in a way that is appropriate for the surface of your wood. You will enjoy your wooden furniture for a long time if you follow our basic care tips.

Lacquered wooden surfaces

Wooden furniture with a lacquered surface is the most durable. Here too, cleaning should be done by damp wiping and then rubbing dry. You should avoid polishes or furniture sprays to freshen up the surface. All these agents can attack the lacquer. With all wooden surfaces, make sure to place a bast or felt mat under objects with high point loads such as cake plates on feet, heavy glass bowls, but also radios, TVs or music systems on glides, so that there are no dents, scratches or pressure marks.

Waxed wooden surfaces

Especially solid wood furniture often has a waxed surface. In addition to cleaning by dusting and wiping with a damp cloth, regular care with beeswax care emulsions is required to rub the surface. After drying, polish only with a lint-free soft cloth. If there has been heavy soiling, remove it with a special wax balm cleaner. If this is still not enough, apply the Wax Balm Cleaner on 280 grit sandpaper or on a polishing pad and then rub it out. Then clean the surface with curd soap or vegetable soap and wax it again.

Oiled and leached surfaces

Even with oiled or leached furniture surfaces, simply remove small stains with a damp cloth. Occasionally rub in natural resin or paraffin oils to care for heavily used surfaces such as dining tables. After the oil has been absorbed for a good five minutes, polish with a lint-free soft cloth. If the surface is very dirty and cannot be removed in this way, treat the area carefully with 280 grit sandpaper. Then clean the surface with curd soap or vegetable soap and re-oil it. If more severe damage is found over the years or if the surfaces are heavily worn, clean the surface with curd soap or vegetable soap, sand it down slightly, absorb the sanding dust and re-oil the furniture.

Repair small damages professionally

As is so often the case in the household, it is only a minor inattention, and the mishap has happened. The toy car has left deep scratches on the table, the great birthday party left quite a few edges on the coffee table, the heavy crystal cake plate on the delicate feet has left quite a few dents on the wooden surface and somehow even the hot teapot must have landed not on the teapot warmer but on the solid wood dresser. What now, is good advice expensive, and does an expert have to go and repair the damage? Just to put your mind at rest: Most of the small damages you can repair yourself.

Stain treatment

The tricky part of stain removal is the risk of the stain becoming firmly fixed in the wood or otherwise worsening the damage. With solid wood it is different, if nothing helps anymore, the damaged area can still be sanded down, but please always in the direction of the grain. And this helps against the most important types of stains:

  • Beewax helps against water edges, which you apply thinly, then blow-dry and polish hot.
  • Candle wax should be blow-dried hot until it becomes liquid again, then absorb with a cloth and wipe the surface with a thin solution of vinegar water.
  • Rubber abrasion, for example from toy cars, is best removed with magic dirt erasers.
  • Heat stains from pots or jugs on wooden furniture should also be treated with a hot hair dryer. The wax under the glaze reacts to the heat of the hairdryer and makes the stain disappear.
  • Grease stains can usually be removed with a mixture of water and pipe clay available in the drugstore. Allow this mixture to work for 24 hours and the stain should disappear. If not, repeat the procedure.

Dealing with scratches, dents and pressure marks

Even small repairs can be done by yourself, if you use professional methods. This applies especially to solid wood furniture that is not coloured or varnished. Here, if nothing else helps, sanding can still be done. This applies not only to minor or major mishaps, but also to some everyday damage, such as shoe soles and their rubber abrasion on the table leg. If the eraser method does not help, simply use fine abrasive fleece and sand with the wood direction. This will remove any oil or wax layer, where the damage is usually located. You should restore the surface protection with oil or wax, depending on what your furniture is protected with.

Removal of light scratches in your solid wood furniture

Required:

  1. Sandpaper with different grit sizes (100, 120 and 240)
  2. Steel wool
  3. Cloths
  4. Wood oil
Before

After

Removal of dents and dents in your solid wood furniture

Required:

  1. An iron
  2. Water
  3. A damp cloth

If your furniture has a dent or pressure mark, first try it with a damp cloth that you place on the dent and carefully warm it up with an iron placed on wool. If you are very careful, you can put a towel between the iron and the damp cloth. This will cause the damaged area to come out again. The wax or oil protection should then be renewed. Small, not deep scratches can be reduced by rubbing with a halved nut. Use a walnut for dark wood and a hazelnut for light wood. For solid wood, you can also use abrasive fleece. However, if the damage is a deep scratch, the only solution is usually to use repair wax in the colour of the wood. According to the instructions, use this wax to fill the depression and renew the surface protection.

Wood Specific Care Tips

Oak furniture

You can clean oak furniture without hesitation with a duster, microfibre cloth or a damp cloth. Please do not clean your oak furniture like any other wooden furniture when wet, because then the wood swells. So please always wipe off any spilled liquids quickly. You can find out more about care and cleaning.

Beech furniture

Vous pouvez aisément You can easily wipe beech furniture with a duster, microfibre cloth or a damp, soft cloth. But please only damp and not wet, otherwise the wood will swell. Therefore, always wipe up spilled liquids immediately. For a little care in between, lukewarm cooking or linseed oil is sufficient. Rub in briefly, wait a good hour and then wipe dry. You can find out more about the care and cleaning of beech wood in our care guide.

Teak furniture

Because of its durability, teak is easy to maintain. A damp cloth is suitable for the interior, but teak is also good for spilled liquids.  You can also wash teak wood indoors and outdoors if it is very dirty or clean it with curd soap. If teak furniture in outdoor areas is to retain its colour and not turn silver grey, it should be regularly rubbed with teak oil.

Elm furniture

Elm wood furniture can be cleaned with a dry or slightly damp cloth. More severe stains can be cleaned gently with a little curd soap, if necessary, and at most damp. This also applies to untreated wood. Please do not place hot pots or pots without a coaster on the table. Please remove spilled liquids immediately. This will prevent stains or damage in the first place.

Scotch pine wood furniture

You can easily clean your scotch pine furniture in everyday life with a duster, a microfibre cloth or a slightly damp soft cloth. You are on the safe side if you then wipe the surface dry with a soft cloth. If your pine furniture has untreated surfaces, they should be cleaned dry or wiped with a damp cloth. In this case, careful, immediate dry wiping should follow without fail.

Pine furniture

Untreated pinewood furniture should be cleaned carefully, preferably dry with a duster or, if necessary, only damp with a damp cloth and then carefully wiped dry. For more heavily soiled pine wood furniture, special pine wood cleaners are available from retailers. The soft wood is also susceptible to small scratches, which can easily be removed with abrasive fleece on solid pine wood. Afterwards, and for regular maintenance in general, untreated pine wood should be oiled with linseed oil.

Acacia furniture

Acacia furniture is relatively insensitive to weather influences. Untreated, the hard wood lasts up to 30 years even outside. Even untreated garden furniture can therefore be easily sprayed with a garden hose. Occasional oiling preserves the beautiful colour tone. Although acacia wood is hard, you should take care of your furniture, especially indoors, as its surface will usually be oiled or waxed. In everyday life you wipe dust with a normal duster, spilled liquids can be removed with a damp cloth. This way nothing can damage the surface finish.

Birch furniture

Furniture made of birch wood can be easily cleaned with the duster in everyday life. Since birch is not as sensitive to moisture, it can be cleaned with a damp cloth without hesitation. But you should not clean your birch furniture wet, so that the wood does not swell. Read more about care and cleaning of your wooden furniture in the care guide.

Alder wood furniture

Vous pouvez nettoyer les meubles en bois d’aulne en toute sécurité avec uFurniture made of alder wood can be cleaned without hesitation with a duster, microfibre cloth or a damp cloth. Please do not clean your alder wood furniture like any other wooden furniture when wet, as the wood will swell. So please always wipe off any spilled liquids quickly. You can find out more about care and cleaning in the care guide.

Walnut furniture

Like all wooden surfaces, walnut furniture can be easily cleaned with a duster, even a damp cloth will not harm. But please do not clean your walnut furniture wet under any circumstances and absorb any spilt liquid immediately, as the wood will swell. The light-coloured edges that form on the dark wood are then very visible. You can find out more about the care and cleaning of wooden furniture in our care guide.

Wood encyclopedia: our wood species at a glance

Our wood encyclopaedia is intended to give you more detailed information about the type of wood used in your furniture. And if you click a little through the wood species, you will see the whole variety existing.

Literally every one of the 25,000 species of wood found in the world has its own characteristics and only thrives under very specific conditions. About 4,000 of these wood species would be suitable for commercial and economic use, while only 600 of these wood species are regularly used by the timber industry. In Europe, only about 30 of these wood species are processed as useful woods and are used, for example, in house building or furniture construction.
Here in our wood encyclopaedia you can learn everything worth knowing about the wood species used in our furniture, their botanical name and their family. Learn about their special characteristics such as hardness and structure and what influence they have on furniture construction.

This way you will understand why a piece of furniture is made in a type of wood that is perfect for its particular purpose. You will learn which types of wood are not suitable for furniture production. So you can be sure that you will always be able to choose a wood species that is perfectly suited to your dream furniture.

Oak

Botanically, oaks belong to the genus Quercus and the family Fagaceae. In Germany, they are the second most important deciduous tree after beech trees, accounting for about 10% of the population. Oaks have trunk diameters of up to two metres and grow up to 50 metres high. They grow slowly, can live for several hundred years and are frost-resistant down to -28°. Oak wood is considered a hard wood species with high strength and high wear resistance.

Use of oak wood

Trunk and crown of an oak tree

Oaks provide a versatile, weather-resistant wood that can be used in many ways, from shipbuilding to house interiors, as parquet flooring, windows or doors. And: It is also ideally suited for furniture construction. In furniture construction, mainly the English oak (Quercus robur) is used, but also sessile oak, winter oak and white oak are used. The densely grained oak wood is generally easy to work both by hand and by machine and is ideal for the construction of solid wood furniture.

Properties of oak
Hardness grade: 34 N / mm²
Structure: sapwood yellowish-white, heartwood grey-yellow
Occurrence: temperate zone of North America, Europe and Asia
Occurence of oak in the world

Manufacture of oak furniture

The noble grain with its discreet light grey or light brown natural colouring makes oak wood equally interesting for stylish loft furniture, elegant highboards or minimalist modern interiors.

An ideal choice due to the hardness of the wood is a robust oak dining table with matching chairs, as well as all kinds of chests of drawers, highboards, boiling boards, living walls or cupboards.

Structure of wild oak

The more a piece of furniture is stressed, the more the advantages of oak wood come into play. It hardly warps at all, not even in drawers and doors. In addition, with oiled, waxed and especially varnished surfaces, it is scratch-resistant and relatively resistant to stains. Chairs are also very forgiving when they spend the night outside after a garden party.

Beech

Beeches belong to the family Fagaceae. The botanical name of the tree is Fagus sylvatica. Beech trees are the most common deciduous trees in Europe and are considered to be a character tree of European-Atlantic forests. Beech trees grow to a height of 40 m with diameters of up to 1.4 m. They have relatively hard wood, but are susceptible to fungal and insect damage. Beech is durable and on average 150 years old when felled. If the beech is a hundred years old, the wood core becomes reddish-brown. The tree is then called redheart beech.

Use of beech wood

The leaves of a beech

Beech wood has a high strength. However, this type of wood “works” strongly, warps quickly and has an above-average shrinkage behaviour. In practice this means easier cracking. Beech wood can be worked well by hand or machine. With its natural adhesive retention, beech wood is well suited for glued wood joints. Many surface treatments are also possible with beech wood. Caution should only be exercised with nails or screws and pre-drilled. Beech wood is used in the interior finishing of houses. It is also used for chipboard and for the construction of household items. Beech wood is also used for veneer production and the construction of musical instruments. One of the most important uses, however, is the construction of furniture.

Properties of beech
Hardness grade: 34 N / mm²
Structure: sapwood light yellow, heartwood slightly reddish-brownish
Occurrence: temperate zone in North America, Europe and Asia

Manufacture of beech furniture

Beech wood

Beech wood is tough, very load-bearing and therefore ideal for dining tables and chairs. If it is steamed, its elasticity increases and it can be easily bent. The solid and heavy beech wood is particularly suitable for steam bending. This produces the characteristic reddish-brownish colour. Beech wood is therefore very well suited for chairs whose rounded components use the bentwood technique that the manufacturer of the famous Thonet chairs already used in the 19th century. The wood for core beech furniture comes from the centre of the tree trunk. This heartwood has a particularly lively grain and a reddish colouring.

Teak

Teak trees are deciduous trees of the genus Verbenaceae with the botanical name Tectona Grandis and only occur in tropical monsoon regions. Teak originally comes from the forests of India and Burma. The hard teak, which is highly resistant to weathering and ageing even without treatment, is also highly resistant to fungal and termite attack. Teak trees grow up to 40 m high with trunk diameters of up to one meter. The wood quality for processing is best at the age of 60-80 years. Teak trees from plantations are also felled at the age of 25 years.

Use of teak wood

Teak forest in India

Teak is easy to work, both by hand and by machine, whether it is by milling, turning and carving. Tropical wood can be used very well for glued joints because of its good adhesive properties. The surface can also be worked well. Teak has been used for centuries in shipbuilding and for the furnishing of ships, whether it is for interior fittings, the furnishing of ships or as teak deck on modern yachts. Teak is also used in the production of floor coverings. Teak is still an important wood species, especially in furniture construction. The resistant, low-maintenance teak is also popular for outdoor use in garden furniture construction.

Properties of teak wood
Hardness grade: 31-38 N / mm²
Structure: sapwood yellowish-brownish, heartwood dark, reddish brown
Occurrence: South and Southeast Asia, tropical Africa and Central America

Production of teak furniture

Teak wood

Today, teak wood from sustainable cultivation is often used for furniture construction. Teak has another major advantage for furniture construction: it is comparatively light. Because of its properties, it is used for furniture indoors and outdoors, whether it is for chairs or dining tables. In outdoor areas, couches and many other furniture elements are added. In the interior, teak is not only used for dining rooms, but also for beds, living walls and small furniture. But not only classic furniture is made of teak. Modern, surprisingly light designs, for example in solid wood, are also increasingly being realized with teak.

Elm

The botanical name of the elm is Ulmus, it belongs to the family Ulmaceae. The elm is a native deciduous tree, whose valuable wood is known in the German-speaking world as elm. Only the standing tree is called elm. Elm trees grow up to 35 meters high, their trunks are a good one meter thick. Up to a height of ten metres, elms form knot-free wood. The wood of the elm is considered hard and heavy, and has a very low shrinkage. The heartwood tree elm forms ring-porous wood. It has pronounced annual rings and shows a sought-after, because particularly lively, wood appearance.

Use of elm wood

The leaves of the elm tree

Elm, the wood of the elm belongs to the valuable woods with various uses. Its low shrinkage makes it suitable for very special applications. Elm is used in the construction of rifle shafts or long bases as well as in instrument making. In interior construction elm wood is used for parquet and panelling. When people still rode horses and carriages, wheels, spokes, rims and carriage bodies were also made from this wood. The elm is also used to make high-quality veneer and for furniture construction.
But the wood of the elm is not easy to process. Although it dries quickly, it tends to throw. The damping properties are good, but the bending and compressive strength is low. The brittle wood splinters easily and the saw blades quickly jam when sawing. It also likes to stand upright when planing. On the other hand, elm wood has a good grip when nailed and glued, and it also accepts surface treatments well.

Properties of the Elm
Hardness grade: 30 N / mm²
Structure: sapwood yellowish white, heartwood brown to reddish brown
Occurrence: Northern and Central Europe, Asia Minor, North America, Japan
Elm wood

Production of elm furniture

Elm wood is one of the most beautiful domestic woods, the decorative woods of field and mountain elms are particularly sought after. Because of their beautiful grain, these woods are often used in furniture making for high-quality veneers.
With its vivid grain, elm wood is often used for solid wood furniture, where the beauty of the vivid grain is shown to its best advantage. Each piece of furniture thus shows its own unique character and a unique play of colours. When exposed to light, the colouring of the wood becomes even warmer over the years due to slight darkening, thus showing its full vibrancy and becoming more beautiful year after year. Elm wood is often used for furniture in the country house style, but it also shows to advantage in clear, unfussy and straightforward forms. It even wins through smooth surfaces and simple lines, because then nothing distracts from the image of the beautiful grain.

Pine

Botanically, the pine belongs to the genus Pinus of the family Pinaceae, and is therefore a pine plant. The Italian stone pine or Mediterranean pine is botanically called Pinus pinea. The pine is “the” Mediterranean tree of the north, because the conifer is present in the whole northern Mediterranean area. With its umbrella-like large crown it determines the landscape. These Mediterranean pines can live up to 250 years. The trees grow up to 30 m high with a trunk diameter of up to two meters. But the tree does not only provide a popular furniture wood, because the seeds of the tree are harvested and deliver the delicious pine nuts.

Use of pine wood

A pine forest

Pine wood can be worked well both by machine and by hand. The wood of the pine is not too hard but very robust, which is why pine trunks have been used for ship masts in the Mediterranean region since ancient times. Pine wood is also used for interior fittings and door frames. Because of its high resin content, pine wood is not suitable for carving and only to a very limited extent for turning. Throughout the Mediterranean region, pine has been a popular wood for furniture making for centuries. Today, it is also popular in other regions for making solid wood furniture.

Production of pine furniture

Pine wood has a light colour and darker grain, irregular texture and small traces of knots. This gives it a lively appearance and makes it a popular material for making furniture. With pine wood furniture, you can bring a bit of holiday into your home, and a touch of pine scent. The Mediterranean flair with the attitude to life of the south is included free of charge. Original and natural as they are, pine furniture does not always have to be rustic. They are just as suitable for a no-frills, Scandinavian style or the softly curved lines of attractive Italian design. Pine wood sets new trends, especially in solid wood furniture. Tables, showcases, chests of drawers and beds are particularly popular and attractive among solid pine wood furniture. The surfaces of pine wood are suitable for many refinements. They can remain just as natural, but can also be oiled or waxed. Pine wood furniture can also be lacquered or varnished in colour.

Scotch pine

The botanical name for the scotch pine tree is Pinus sylvestris, which belongs to the Pinaceae family. Scotch pines are heartwood trees and grow up to 50 m high. They can reach a diameter of up to one metre and have many branches. The very resinous heartwood of the pine trunk is relatively soft and flexible and can be easily split. It darkens quickly. Resin channels and annual rings are quite distinct. The pine is the second most common tree in Central Europe after the spruce. In all of Europe, the pine is even the most important tree for forestry. The fast-growing coniferous tree grows straight and is very undemanding in terms of environmental conditions.

Use of scotch pine wood

Scotch pine wood

The versatile pine wood is used both as building and construction wood and as industrial wood, as well as in interior design and furniture construction. Pine wood is also used for semi-finished products such as glued wood and as a material for panels. The resin is also used, from which turpentine oil is extracted. Impregnated pine wood for the garden is available in every hardware store. Pellets are often produced from leftovers and shavings resulting from processing.

Pine wood dries quickly and is easy to work with both by machine and by hand. The soft wood can be easily peeled, sliced, sawn and planed. If the wood is very resinous, however, tools can stick together. Nails and screws hold well in pine wood. Before surface finishing, the resin on the surfaces is degreased and then stained and polished well.

Properties of the scotch pine
Hardness grade 40 N / mm²
Structure: sapwood yellowish-white, heartwood yellowish-reddish to dark yellowish-red-brown
Occurrence: Northern, Central and Eastern Europe to West Siberia, North America
Scotch pine wood with white wash effect

Production of pin furniture

Domestic scotch pine wood is one of the most popular and cheapest ways to bring a piece of nature into your home. Often this furniture is untreated and can be oiled, waxed, stained, varnished or lacquered according to your own taste in a do-it-yourself process. Pine wood is comparatively light and so easy to handle in your own household. From children’s rooms to living and dining rooms and even bedrooms – pine wood furniture is used everywhere.

In the straight Scandinavian design, pine wood furniture began its triumphal march throughout Central Europe and never goes out of fashion. Especially the rustic branch pine wood brings a natural atmosphere into house and apartment and does not look as solid as oak wood for example. Pine wood furniture radiates a lot of warmth when it darkens a little over the years and thus becomes more and more beautiful. Today, pine furniture can also be found as solid wood furniture that ideally matches the natural charm of pine.

Acacia

If one speaks of acacia wood in Central Europe, it is easy to get confused, because our acacia is actually a robinia, which is also called “false acacia” or “false acacia”. Botanically, the tree we usually call acacia Robinia pseudacacia. The botanical family to which these acacias belong are the Leguminosae and there the subfamily of the Papilionatae. Acacias grow up to 30 m high and have a diameter of one meter. The wood of the acacia is very hard, yet surprisingly elastic. Acacia wood is extremely resistant to fungi, pests and the rigours of the weather. It can therefore also be used in outdoor areas.

Use of acacia wood

An acacia tree

The heavy acacia wood convinces with a hardness and strength that even the oak cannot compete with, yet it is characterized by great elasticity and very weather-resistant.
With resistance class 1, acacia wood can be used outdoors without any problems. Even without impregnation, acacia wood has a service life of around 30 years in outdoor applications. It is not only used for fences, privacy screens, poles and palisade walls in the garden, but even for masts in shipbuilding. In addition, acacia wood is often used for furniture in both indoor and outdoor areas.

Properties of the acacia
Hardness grade: 34-46 N / mm²
Structure: sapwood light yellow, heartwood yellowish olive
Occurrence: Southeast of North America, Southern Europe and Africa
Acacia wood

Production of acacia furniture

Acacia wood furniture is produced for indoor and outdoor use. Furniture in humid areas as well as for the bathroom is also often made of the hard wood. Acacia wood is also ideally suited for the production of high-quality solid wood furniture indoors, from bed to dining table.

In processing, the wood of the acacia is difficult to split but very easy to bend. The drying process must be slow, otherwise the wood would throw or crack. But once it is dried, acacia wood has a high durability.

The smooth, elegant acacia wood with its varied, irregular texture creates highly decorative accents. The heartwood with its yellowish olive tone is used for furniture production. It darkens until it has the warm golden brown colour for which it is known. Acacia wood furniture can be lacquered or brushed and the finish can range from brown to honey yellow. With its elegant grain, acacia house furniture radiates noble southern living culture, which is particularly effective in solid wood furniture, whether inspired by straight Italian design or colonial style.

Birch

Botanically, birches are called Betula and belong to the Betulaceae family. They are sapwood trees with very light and flexible wood. Birches are considered to be quite robust pioneer plants and are the first tree species to grow in open spaces. They can be found at altitudes of up to 1,500 metres. Birches grow up to 25 meters high, their voice usually only reaches trunk diameters of half a meter. They grow very quickly at the beginning, but with a life expectancy of 120 years, they belong to the short-lived tree species. Young birch trees can be recognized by their almost smooth white bark, which becomes increasingly black and barklike with age on the trunk.

Use of birch wood

The fine and tough birch wood is very elastic and quite flexible. Birch wood is not as easy to split as other woods, but the very light reddish-white to yellowish wood is only slightly shrinking. The soft wood is comparatively light and can be worked well by hand or machine, whether it is sawing, peeling or cutting. Birch wood is also well suited for turning, milling and carving, and it is easy to polish. Surface treatment is also easy. In addition to polishing, staining is also very well possible. However, gluing is somewhat problematic due to the dense surface. Care must be taken especially when drying the birch wood, because birch tends to warp and crack. The versatile birch wood is used for veneer production, aircraft construction, plywood and flooring, also for parquet production. But the odourless wood is also suitable for children’s toys and for turning work.

Properties of birch
Hardness grade: 23 N / mm²
Structure: sapwood and heartwood without colour difference, white to pale reddish yellow
Occurrence: Temperate zones in Europe up to the Caucasus, North to Central Asia, North America

Birch wood

Production of birch furniture
Birch furniture is mainly produced in Scandinavia and the Baltic States, where the light wood is particularly appreciated. However, birch wood can also be stained darkly and then serves as a substitute for the dark brown mahogany or walnut wood. Solid birch wood is often used for chairs and tables. Furniture fronts veneered with birch wood are often used in bedrooms. Finnish oaks with their flamed wood are particularly decorative and make beautiful light effects possible.

Alder

Botanically, alders belong to the genus Alnus Glutinosa and to the Betulaceae family (birch plants). Alders grow up to 30 meters high, the trunk is about one meter thick. As sapwood trees, alders have the peculiarity of a fairly even, pale wood colour. The decorative annual rings of the alder, however, are very distinctive. Alders have light and soft wood, but it is relatively solid and only moderately shrinking. All types of alder wood have little elasticity, but are easy to bend.

Use of alder wood

The tough alder wood dries without deformation and is easy to process, whether manually or with machines. The wood of the alder is particularly good for providing smooth surfaces. It is also easy to turn and carve. Although there are hardly any differences in use between the different types of alder, black alder wood is considered to be of better quality. Because the surface of this wood can be refined very well by polishing or staining, alder wood is also used as a substitute for cherry wood, walnut wood and even mahogany in furniture making. Alder wood is used to build musical instruments, picture frames, pencils and coloured pencils. Clogs and other clogs are also made from alder, as are wooden toys. Alder wood is also used in furniture construction.

Properties of the alder
Hardness grade: 17 N / mm²
Structure: sapwood and heartwood evenly pale yellowish to reddish-white
Occurrence: in Europe, North Africa and Siberia

Production of alder furniture

In furniture construction, alder wood is used for chairs, tables and many other furniture such as beds and cupboards. In addition, alder wood has a very long tradition in furniture production. Therefore, this wood is often used for the restoration of old furniture. Alder wood is also being used more and more frequently for solid wood furniture. Since the fine-pored alder wood has a high durability, hardly warps and works very little, furniture made of this type of wood is particularly robust and can withstand many a nudge in the children’s room, even if it is a soft wood. Because alder wood can be used to imitate precious woods such as mahogany or walnut, there are also dark pieces of furniture whose wood actually comes from the alder. Because the striking annual rings are very decorative, many alder veneers are also used in furniture making.

Walnut

Botanically, the European walnut tree is called Juglans regia, the American Juglans nigra, both belong to the Juglandaceae family. The walnut has a slender trunk, which usually reaches about one to two meters in diameter. The knotless shafts grow to six to ten meters in size. All walnut species grow to a height of 30 to 50 metres. Walnut trees can be quite different in their wood structure. The European walnut is heavy and hard, the North American walnut is much lighter. Overall, walnut wood is solid, tough, quite flexible and only moderately dense.

Use of walnut wood

Walnut wood is often used in furniture making because of its beautiful colouring, even sapwood is used here. However, walnut is also used in the manufacture of pianos and other instruments in carcass construction. Walnut is often used for the stock of rifles, and walnut is also used for woodturning and sculpting work. Walnut is used in the interior finishing of houses and apartments for panelling and parquet flooring. The wood from all types of walnut is extremely easy to work with, whether it is manual or mechanical, whether by sawing, slicing or turning. Also all wood joints hold well. Walnut surfaces are easily treated with polishing or staining agents.

Properties of the walnut tree
Hardness grade: 26 N / mm²
Structure: European walnut: sapwood light grey, heartwood matt brown to black brown; American walnut: sapwood grey brown to light yellowish, heartwood dark brown clair, cœur brun foncé
Occurrence: temperate zone in North merica, Central and Eastern Europe to the Black Sea and into Asia Minor
Walnut wood

Production of walnut furniture

Walnut wood is very versatile in appearance. The walnut has a not quite even colouring, ranging from light brown to black-brown and often has a reddish shimmer. More rarely, the wood also has a violet shimmer. A particularly popular feature is the beautiful grain of the various walnut trees, which is very lively and runs through the entire wood with its broad dark veins. The grain structure of the walnut trees ranges from flamed to striped to cloudy. The colour of walnut wood also varies greatly and depends on the location of the tree. For example, the popular American walnut is somewhat more evenly coloured than European woods and very dark. European walnut, on the other hand, has a more reddish tinge and is lighter in colour. With so much difference, walnut is also a popular veneer wood that has a very lively surface. However, walnut darkens considerably when exposed to sunlight, and the grain does not remain as prominent. Walnut is considered a precious wood and is not cheap. In furniture making, the wood is often used for bedroom furniture or living room furniture and is also used for solid wood furniture.

Size guide for dining tables – Determine dimensions

You are not sure how to find the right dimensions for your table? Then you are probably also unsure how much space should be reserved for a functional dining table, because chairs and traffic routes are also part of the equation.

In this guide, we give you a few tips on how to determine the correct size and also how to determine whether the dining table with the desired dimensions fits into your personal living situation. Find a large selection of dining tables on our site.

Determine the desired dimensions of your dining table

First of all, think carefully about how many people will be seated at your dining table in normal everyday life. Then take a moment to reflect on how many people come to visit frequently and how large the circle is on average. Now you can use average measurements to determine the table size required for the number of people you wish to have at your table.

Calculate the table size

Dimensions to take in to consideration

In order to determine the table size, we first of all start with the “cover size”. This is the space required per person for a fully laid table with glasses, cutlery and plates. Per place setting we estimate 60 cm table width and 40 cm depth.

If you regularly want to accommodate many people at your rectangular table, the dimensions should be chosen somewhat more generously. Also note the depth of the table. A large table of less than 100 cm depth offers hardly any space for decoration, bowls and plates.

Golden Rule
The necessary table size also depends on the size of the chair. For a first rough estimation, it is sufficient to use the standard size of 45 cm width and 50 cm depth. In order to have some elbow room for eating, you should add a few centimetres more distance if possible, the ideal minimum distance between the chairs is 20 cm.

This gives the following guidelines

Minimum size for squared dining tables

  • Dining table for 4 persons – squared table with a size of at least 80×80 cm
  • Dining table for 6 persons – rectangular table with a minimum size of 180×90 cm
  • Dining table for 8 people – rectangular table with a minimum size of 240×100 cm
  • If the front sides of the table are used, add 20 cm

Minimum size for round tables

  • Dining table for 4 persons – round table with a diameter of 90-100 cm
  • Dining table for 6 persons – round table with a diameter of 120-140 cm
  • Dining table for 8 persons – round table with a diameter of 140-160 cm

Calculate the required area for the dining table

Now you have determined the dimensions that your personal dining table should have so that it meets your requirements. What you now need to determine whether your desired table will also fit in your home is the size of the space needed for this table, the chairs and the traffic routes.

To calculate the space required for your desired dining table, add another 100 centimetres to the table dimensions on all sides of the table, then each guest can move comfortably, get up, sit down and walk behind the other guests. If necessary, every guest can then be served. If main routes such as the way to the kitchen still have to be considered, you should add another 20 cm. If you want the dining table with chairs and traffic areas to be reasonably comfortable, you need these room sizes.

Minimum space requirements for square dining tables

  • Table size 80×80 cm: 280×280 cm
  • Table size 180×90 cm: 380×290 cm
  • Table size 240×100 cm 440×300 cm

Minimum space requirements for round tables

  • diameter 90 cm: 290×290 cm
  • diameter 120 cm: 320×320 cm
  • diameter 140 cm: 340×340 cm
Golden Rule
Of course, in case of emergency you are free to tinker a bit and instead of one meter of space behind the tables, only 80 cm are available. Then it will be a bit tighter, but still manageable. Don’t forget to take into account the actual dimensions of the chairs you are considering.

Consider armrest height for chairs

When choosing chairs with armrests for your dining table, don’t forget to take into account the height of the table, the height of the frame and the height of the armrests. If the armrests of the chairs you want are higher than the legroom under the table, which is the value of the table height minus the height of the frame, the chairs will take up considerably more space in everyday life. They cannot be pushed under the table. However, if this gain in space is important to you, it is better to ask the shop of your choice before you order.